KYORITSU 8112 BNC, Clamp Adaptors
Specification
Model : 8112 BNC
• AC CLAMP ADAPTOR
Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope.
Refer to a diagram shown at left for application.
Specifications are same as those for Model 8112.
Range Measuring Ranges Output Voltage Accuracy Frequency Response
200mA : AC 0~ 500mA AC1V/ A
( 1000mA’ 1V) | ± 1.5% rdg± 0.2mA 50Hz~ 1kHz
AC 0~ 1000mA | ± 3% rdg± 0.4mA 40Hz~ 10kHz
2A : AC 0~ 20A AC100mV/ A
( 20A’ 2V) | ± 1% rdg± 1mA 40Hz~ 1kHz
| ± 1.5% rdg± 2mA 1k~ 10kHz
20A : AC 0~ 20A AC10mV/ A
( 120A’ 1.2V) | ± 1% rdg± 0.01A 40Hz~ 1kHz
AC 20~ 60A | ± 2.5% rdg 50Hz~ 10kHz
AC 60~ 120A | ± 2.5% rdg 100Hz~ 10kHz
Conductor Size : Ø 8mm max.
Frequency Response : 30Hz~ 100kHz ( -3dB)
Withstand Voltage : 500V AC for 1 minute
Dimensions : 153( L) × 18( W) × 23( D) mm
Weight : 100g approx.
Accessories : 9057 ( Carrying Case)
Instruction Manual
