Specification :
Metal mould coating BS - 633 metal mould coating BS - 633 detailed description:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Category:
The new products recommended - > metal mould coating BS - 633
Name of commodity:
Metal mould coating BS - 633
Browse the number:
2999 times
Product description
BS - 633 is a kind of inorganic compound coating, the high temperature stability as 1400. Is the latest from American pele introduction of new coating, this product can be parting with foreign product's DAG633 comparable's love is specially designed for aluminium and its alloy gravity and low pressure casting and design of its tuomoji, has the following features:
1 a water-soluble, the environmental pollution of coating
2. Improve metal mould and mould using life
3 to protect metal mould
4. Can be used for a class of metal bubble
5 for mould and low-rise coating with good adhesion
6. Excellent thermal performance
7. To form a very thin surface
8. Suitable for in mould temperature between 500-140 degrees Celsius
Using methods
Using spray manner.
Before using shall stir to make the paint to use uniform.
Mould should clean up the best on the sand fall coating adhesion is better.
Mould temperature control in 180-240 degrees for spraying.
Coating thickness: bottom-formwork thickness for 30-40um die and mould, 80-180um.
Packet 5kg outfit: a barrel, 20kg/box
Storage: store in dry with good ventilation.
Shelf life: six months
Product technical parameters
Shape looks: white paste
Apparent density: paste: 1.25 g/cm&sup. Dry,
After cm&sup g / 0.7.
Heat conductivity: 0.1 Kcal/h. degrees Celsius (500 degrees Celsius)
Maximum refractoriness: 1300 ¡ã c
Line: 0.7% (800 shrinkage, 1 small dry
When)
Transverse bending strength: 20-30Kg/cm2