Specification :

Model IPES IR/ UV Flame Detector
SPECIFICATIONS
Power Input 18 - 32VDC
< 2 Watts standby; < 3 Watts in alarm
< 5 Watts in self test
< 7.5 Watts with heater on maximum
Spectral Range 4.2 to 4.6 microns ( IR)
180 to 250 nm ( UV)
Response nHeptane, 1 ft
2,
100 ft, 5 seconds
Methanol, 1 ft
2
, 85 ft, 5 seconds
JP5, 2 ft
2
, 100 ft, 5 seconds
Time Delay Slow: 4 seconds; Fast: 2 seconds
Range Setting Near / Far
Field of View 90° horizontal and 90° vertical
Analog Output Analog signal 4-20mA
Fault signal 2 mA ± 0.1 mA
Ready signal 4 mA± 0.1 mA
Fire Signal 18 mA ± 0.1 mA
Test Mode Signal 8 mA ± 0.1 mA
Relay Output Fire: J1, 1-2 Normally open
Closes on fire detection
Latching, non-latching option
Fault: J1, 3-4, Normally closed
Opens on fault detection
Latching, non-latching option
Wiring 14 AWG ( 2.08 mm2) or 16 AWG ( 1.31
mm2) . Shielded cable recommended.
Temperature - 40° C to + 85° C operating; 95% humidity
Housing Aluminum ( standard) , # 316 Stainless Steel
( optional) ; 3/ 4� NPT cable entry
Dimensions 11.6� wide, 19� tall, 22.3� deep
Al: 5.5 pounds, SS: 11 pounds
Approvals FM Class I, Div 1, Groups B, C, D
ABS Class I, Div 1, Groups B, C, D
IP-66
Warranty Five years from date of purchase