Specification :

INTRODUCTION

ARMI – EHB.01 it is a mixing between polymer and anti-foam to control slag water and foam onto evaporator and head exchanger and as controller
to slag water and clay onto Boiler

ADVANTAGE

* Hot transfer surface free from water slag to make a maximum production of distilate
* To eliminate a slag water intermittent.
* Our ARMI – EHB.01 composite with anti-foam to control foam.
* To minimal your working job and cost of maintenance in periodically.

DIRECTION FOR USE

Before you use our ARMI – EHB.01, first you dilute with distilate water within removal tank dosage. Daily dosage depend to specify grafity ( SG)
of water sea used, tested with Hydrometer

SG water sea over 1.038, more then contruction potential to slag water and our ARMI – EHB.01 dosage received more. In the other hand .
lowest SG water sea, to construct slag water will be minimized.

Our ARMI – EHB.01 can be injected via flow meter to control slag water and clay onto Evaporator, daily dosage is 0.75 liter per 10 ton water

SPECIFICATION

* Density with 15oC 9 ML : 1, 080
* PH ( 1% Solution) : 9.0 - 10
* Appearance : Liquid Transparent

CAUTION

Keep away directly from food, spiled to wash with water immediately. When you use, wear uniform and glove, if contact your eyes, then wash with
clean water immediately