Specification :

INTRODUCTION

ARMI – 140 TR it is as specific formula to clean air cooler and turbo changer when machine being operated.
A hydrocarbon mixing chlorized with active emulsion to have characteristic synergy, to make our ARMI – 140 TR still effective to machine operational in high temperature.
FUNCTION

ARMI – 140 TR to clean air cooler and turbo charger within machine being operated, to parts of machines, valve caused carbon
ADVANTAGE

It is to clean air cooler and turbo charger when machine being operated. To short your time and emulsion with water and not pollution environment. Be active in high temperature and not danger to human and others species.
DIRECTION FOR USE

1. Turbo Charger
You mix our ARMI – 140 TR is 4 liter to 3 liters clean water and to pour to storage with available dosage to machine ( if none width surface) .
Following to be injected to mixing 1 to 3 clean water. You use with spray/ submerge or circulation.
2. Air Cooler
You could spray our ARMI – 140 TR without liquid when your machine is shut down, you could spraygun to isolated palce. Let is idle approximately 1 hour, then to spray with high power water.
You could pour media machine to no-liquid solution of ARMI – 140 TR, then to spray with high power water. You could spray our ARMI – 140 TR, let is idle few time, to be cleaned with circulation and concentration for 25% of ARMI – 140 TR for 4 hour.

SPECIFICATION

* Specific Gravity : 1, 09
* Flash Point : 194 oF
* Pour Point : None

CAUTION

Keep our ARMI – 140 TR in cold temperature, keep away from food. Avoid direct contact to your body, use glove and uniform. If contact with your eyes please you wash with clean water