Specification :

www.fastfom.com
sales@ fastfom.com

E1 to V.35 V.24 X.21 Converter Supports Nx64K: IC-GV
cenny.xu[ at] hotmail.com

E1 to V.35 Converter.
E1 to V.24 converter.
E1 to x.21 converter.
E1 to Ethernet converter.
E1 to RS232 converter.
E1 to RS449 converter.
E1 to RS530 converter.
Both Framed( N* 64K) and Unframed( 2048K) , 75/ 120ohm

Description

E1 to V.35/ V.24/ X.21 Converter Supports Nx64K

Introduce

Features

High-powered all-purpose unframed E1( 2048kbps) and framed E1( N* 64kps, N= 1-31) to V.35 converter

To fully use bandwidth fractional E1 and sustain cascade and time division multiplex( TDM) , time slot is set up by switches.

Data rata: synchronism N* 64Kbps( N= 1-31) -2048Kbps

Fully lucid signal conversed clock mode to sustain DTE and G.703 network clock

Convenient diagnosis function, test of analog loopback of local terminal and digital circular of remote terminal There are many director lights on the front panel to display work state and alarm signals of the equipment.

Lines are according with CCITT G.703, G.704, G.706, G.823. Lines code HDB3, under graded E1 mode, sustain CRC4ON / OFF, CAS / CCS optional

G.703 lines interface: impedance 120Ohm( RJ45) and 75Ohm( BNC) optional

2 kinds of machine model : standalone and rack-mountable.

Overview

V-IC-GV is an Asic-based converter using one E1/ G.703 to convert to V.35. It can convert successive N* 64K ( N= 1--32) data stream into PCM signal of E1. The data rate is up to 2048Kbps. Placed in E1 frame, data of user just need necessary timeslot. Setting timeslot is continuous and according with rate of data port. The data ports have V.35 and V.24/ RS232C which are optional. The ports support external clock and become linking end line.

V-IC-GV satisfies the requirements of G.703, G.704& G.706 of ITU.

V-IC-GV has local and remote loopbacks. Therefore user can use circuity-test and malfunction diagnose conveniently.

Specifications
01.Rate of data tramission: N* 64Kbps( N= 1-31) , 2048Kbps
02.Transmission mode: Synchronization;
03.Line interface: Impedance 75ohm, physical interface BNC; Impedance 120ohm, physical interface RJ45
04.Transmission features: According with G.703;
05.Clocking: LINE; EXTERNAL;
06.Testing method: Local analogy loopback, Remote digital loopback;
07.DCE interface: V.35 or V.24/ RS232C;
08.Power supply: 220V + / - 10% , 50Hz; 48VDC( optional)
09.Power Consumption: 5W
10.Volume: 245mm* 215mm* 50mm; 9" L* 5.8" W* 1.6" H
11.Temperature: 0oC ~ 40oC
12.Humidity: 0~ 95%