Specification :

Characteristic:

EFMS-2 Automatic pocket-spring production line is professional equipment for producing pocket spring units. This machine consists of the pocket spring coiling machine, spring assembling machine and spring packing machine. Firstly, the pocket spring rows are produced by the pocket spring machine, and then transferred to the gluing system by the connection system. After this, the glue is extruded onto the spring rows and/ or top and bottom non-woven fabric to make them a unit. When a unit is finished, the machine will automatically cut the up and down non-woven fabric if used.

EFMS-2 pocket spring machine finishes the whole production process from wire to whole spring unit, and it' s fully automatic and labor saving. Further, it' s of safety and high capacity.? This pocket spring machine? bears the features below: compact design, easy operation, high capacity and cost saving.It' s an ideal equipment for spring units production.

Main Technical Parmeters:
Production Capacity: 62 Pcs/ min
Overall Dimension For Pocket Spring Machine: 2390× 1680× 1730mm( excluding the fabric or wire shifts)
Overall Dimension For Assembler: 3720× 3300× 1800mm
Power Supply: 3-Phase, 380V, 50Hz
Air Pressure:  0.8-1.2 Mpa
Air Consumption:  2.2m3/ min
Total Power: 37.71KW
Pocket Spring Machine Power: 30KW
Pocket Spring Assembler Power: 7.71KW
Spring Height Before Pocketed:  160-250 mm
Spring Height After Pocketed:  120-210 mm
Wire Diameter:  ¦ 1.8-¦ 2.3 mm
End-Coil Diameter:  ¦ 52-¦ 70 mm
Mid-Coil Diameter:  ¦ 55-¦ 70 mm
Non-Woven Fabric Width For Pocketing:  400-520 mm
Non-Woven Fabric Thickness: e70g/ ¡
Non-Woven Fabric Width For Assembling:  700-2100 mm
Outer Diameter Of Non-Woven Fabric Reel For Assembling: d1000mm, heightd150Kg
Gluing Unit Width: d2100mm