Specification :

Brief introduction
Our product is suitable for concentrator concentrate and tailings dewatering to 20-30% of the pulp increased to about 40-70% of the concentrate is widely used in metallurgy, chemical, coal, non-metallic mineral processing and environmental protection industries.

Characteristics:
( 1) Adding flocculating agent, bigger the diameter of the deposit solid grain, speed up the deposit.
( 2) Set the lean board, reducer the mash deposit distance, increase the deposit square.
( 3) Have effect on flocculating. Percolating, compressing and dealing quantity of the slurry deposits.
( 4) Fit the perfect automatic facility.

Functions
The main functions of layer concentrator in mineral processing are dewatering and concentrating.
In the wet dressing operations, concentrate water contains a lot of need for dehydration, in the sorting process in order to increase the concentration of mine to the next paragraph, to improve the effectiveness of sorting, to carry out mining in dehydration, enrichment. Thickener in the dressing operations for dehydration and concentration functions.

Technical parameters
Type Concentrated tank m Sediment area( m2) Rake part Motor Capacity( t/ d) Weight t
Type Specification Inside diameter Depth Bottom of tank Method Height m Time for per round min/ r Transmission Promote
NZS-1 ¦ 1.8m 1.8 1.8 2.54 manual 0.16 2 Y90 L-6 1.1KW — - 5.6 1.235
NZS-3 ¦ 3.6m 3.6 1.8 10.2 manual 0.35 2.5 Y90L-6 1.1KW — - 22.4 3.064
NZS-6 ¦ 6m 6 3 28.3 manual 0.2 3.7 Y90S-4 1.1KW — - 62 8.751
NZSF-6 ¦ 6m 6 3 28.3 manual 3.7 Y90S-4 1.1KW — - 62 3.649
NZ-9 ¦ 9m 9 3 63.6 automatic 0.25 4.34 Y132S-6 3KW XWD0.8-3 0.8KW 140 6.134
NZS-9 ¦ 9m 9 3 63.6 manual 0.25 4.34 Y132S-6 3KW — - 140 5.146
NZS-12 ¦ 12m 12 3.5 113 manual 0.25 5.28 Y132S-6 3KW — - 250 8.51
NZ-15 ¦ 15m 15 4.4 176 automatic 0.4 10.4 JTC752A-44 5.2KW Y112M-6 2.2KW 350 21.757
NZ-20 ¦ 20m 20 4.4 314 automatic 0.4 10.4 JTC752A-44 5.2KW Y112M-6 2.2KW 960 24.504
NZ-30 ¦ 30m 30 7.165 707 — - 0.61 13.7 Y100L1-4 2.2× 2KW YCJ132-S 1.5KW — - 31.8
NZS-45 ¦ 45m 45 4.636 1590 manual — - 20 JTC672A-44 5.2KW YCJ160-S 2.2KW 515 47.81
NT-15 ¦ 15m 15 3.5 177 — - — - 8.4 Y132M2-6 5.5KW — - 390 11
NQ-18 ¦ 18m 18 3.5 255 — - — - 10 Y132M2-6 5.5KW — - 560 10
NQ-24 ¦ 24m 24 3.4 452 — - — - 12.7 Y160M-6 7.5KW — - 1000 23.3
NG-30 ¦ 30m 30 3.6 707 — - — - 16 Y160M-6 7.5KW — - 1570 26.42
NJ-38 ¦ 38m 38 4.9 1134 — - — - 10-25 JZT252-4 11KW Y160M-6 7.5KW 1600 55.26
NT-45 ¦ 45m 45 5.05 1590 automatic — - 19.3 Y160L-6 11KW — - 2400 58.64
NTJ-53 ¦ 53m 53 5.07 2202 — - — - 23.18 Y180L-6-15kw — - 6250 79.80
NT-100 ¦ 100m 100 5.65 7846 — - — - 43 Y180L-6 15KW — - 3030