Specification :

Specification :
Accuracy:
25 ° C: Typically ± 0.4% of reading ± 3 counts
on the least significant digit displayed
( all ranges) .
0 - 55 ° C: Typically ± 0.6% of reading ± 3 counts
on the least significant digit displayed
( all ranges) .
Range Selection: Autoranging ( 3 ranges) .
Linearity: ± 0.05% .
Sensors: Any LI-COR type " SA " or type " SB� sensor with
BNC connector; Quantum, Pyranometer, or Photometric.
Older LI-COR radiation sensors, or those without any
connector must have a BNC connector installed. Contact
LI-COR.
Sensor Calibration: Each sensor is supplied with a calibration
multiplier. Calibration multipliers for two sensors can
be stored in memory. Calibration multipliers are entered
from the keypad.
Signal Averaging: Sensor output can be collected and displayed
as a 15-second average ( approximately 60 readings) .
Averages are retained on the display in HOLD mode.
Display: 4 1/ 2 digit LCD display. Updated every 0.5 seconds
in Instantaneous mode.
Keypad: Sealed, 5-key tactile response keypad.
Battery Life: 150 hours typical with continuous operation.
Power Requirement: One 9V Eveready Alkaline # 522 or
equivalent ( LI-COR part number 216) .
Low Battery Detection: Low battery indicator displayed
with approximately 20 hours battery life remaining.
Operating Conditions: 0 to 55 ° C, 0 to 95% RH
( non-condensing) .
Storage Conditions: -55 to 60 ° C, 0 to 95% RH
( non-condensing) .
Size: 14 cm L × 7.7 cm W × 3.8 cm D ( 5.5 " × 3 " × 1.5 " ) .
Weight: 0.26 kg ( 0.57 lbs) .
Warranty: 1 year parts and labor.