Specification :

Application: laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

Specification parameter:
1) Alternant electric voltage: 220V/ 50Hz;
2) Upper limit power: 2000W, average 800W;
3) Adjustable work temperature: 50-600 degree.
4) Adjustable: self-move speed 0.8-15M/ per minute;
5) Whole weight: 10 kilogram;
6) Size: 40cm* 30cm* 28cm.

When use: 1) Immobilise both ends of each disjunct poster surface with something
such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each
disjunct poster surface edge;
2) Turn on the machine, prepare warm up about 2 minutes;
3) Bring up the machine, and place the roll at the end of the overlap edge;
4) According to quality and thickness of the poster surface material, consider the
ground circumstance, adjust the proper temperature and speed, handle the Fuse
machine Gun down and insert it between the two poster banner edges, then the
machine start running, after go pass the overlap edge, the two disjunct banners
will be well joined in one.