Specification :
Application:
This instrument is used for analyzing & measuring the content & concentration of elements ( K, Na, Li, Ca, Ba) . It can be widely applied to agriculture ( soil, fertilizer, tobacoo) , industry ( cement, glass, ceramics, mineral or ore powder, fireproof material) , food ( wine, water) , laboratory, clinical experiments and pathology research ( serum, urine, plasma) , etc.
Characteristics:
# With 5 channels and be able to detect K, Na, Li, Ca, Ba 5 elements. With K, Na, Li, Ca, Ba five filters, which can detect three kinds of elements, show three kinds of element content simultaneous.
# Operates on propane, butane or liquefied petroleum gas.
# Standard accessories: air-compressor, PC software or micro-printer.
# LCD Display, touch panel with numeric keypad.
# Single point calibration & calibration curve can be saved.
# RS232 interface, external computer or printer. With a mist separator.
Model: AP1500
Measurement Range:
K: 0-100ppm;
Na: 0-100ppm;
Li: 0-100ppm;
Ca: 0-1000ppm;
Ba: 0-3000ppm;
Measurement Limit:
K: 0.01ppm
Na: 0.01ppm
Li: 0.025ppm
Ca: 0.1ppm
Ba: 10ppm
Drift: d 3% ( after 30 minutes when the instrument stability)
Sample Rate: 4 ~ 6ml/ min
Linearity: Better than the best results of the intermediate value of 2% ( single-point CAL)
Response Time: 8s
Time Stability: Less than 15 seconds ( when the sample was taken after the flame) .
Calibration Methods: Straight line, broken line, secondary fitting.
Size & Weight: 530X510X580mm & 27kg
Model: AP1400
Measurement Range:
K: 0-100ppm;
Na: 0-100ppm;
Li: 0-100ppm;
Ca: 0-1000ppm;
Measurement Limit:
K: 0.01ppm
Na: 0.01ppm
Li: 0.025ppm
Ca: 0.1ppm
Drift: d 3% ( after 30 minutes when the instrument stability)
Sample Rate: 4 ~ 6ml/ min
Linearity: Better than the best results of the intermediate value of 2% ( single-point CAL)
Response Time: 8s
Time Stability: Less than 15 seconds ( when the sample was taken after the flame) .
Calibration Methods: Straight line, broken line, secondary fitting.
Size & Weight: 530X510X580mm & 27kg