Traffic Light Controller Inotrans

Quantity Order:

Origin:

Indonesia

Payment Method:

Telegraphic Transfer (T/T), Cashier Order, L/C

Technical Specifications Inotrans Traffic Light Controller

- Circumference Temperature: 5o C to 70 ° C
- Relative humidity: 0% s / d 95%

Full Technical Specifications for the Traffic lights Vehicles:
a. Using a system of modules thus simplifying the treatment
improvement and development by using a connector that
meet the quality standards of existing
b. Having the ability to manage traffic to the scale below:
Basic groups of signals for the vehicle s / d 6 vehicle signal group
for pedestrian crossings yahng can be developed. And each of
each slot can be used both for vehicles and for
penyberangan pedestrian
c. Minor work Size Automatic Control, using the High Speed
Microprocessor.
d. Having the ability to manage traffic by the number of phase does not
limited, the signal lamp independent, multi-program with a range of time per
fifteen minutes may differ
e. Setting done so that the lamp with a special application programming
time is easy and simple.
f. There is no mechanical movement in its operations because of all controlled
by hight speed microprocessor, ensures economic life.
g. Each lamp work independently so that the phase and free program
can be adjusted as needed per minute, per hour, per day in
week time program can be different. " System 7 phase, 99
Options Group, Customize per minute in every hour per day
the week can be different) " .
f. The transfer program is automatically good with Full electronics, swich
mechanically or manually time for which data are easily incorporated into the tool
the control.
g. Cycle ignition unit program with a minimum of 1 second and multiples thereof
with units of seconds ( not didobel per 2 seconds) . Maximum
cycle
ignition using a scale of s / d 3-digit decimal.
h. Having the ability of a single / single program or multiple programs fixed and
and flashing.
i. Equipped with beginner tools work program ignition control traffic lights
flashing amber lights which lit first, followed later by
lit without blinking amber or red all all, each
with time can be programmed.
j. Ignition time program, every aspect of color lights can be programmed
strobes.
k. Equipped with manual control equipment that can be controlled
by officers for the extension and shortening the green light and blink.
l. Having a working tool and indicator light modules both in
state function or state of " Fault"
m. Have the capacity to pendektesian: " Conflic Signal" and " Conflic
Grend " . In circumstances such as this fault automatically turn on the lights blink
( Flashing) .

n. Have facilities for safety against overcurrent that uses
mini circuit breaker and safety of using the earth leakage current
leakage circuit breaker and security features to prevent
damage against lightning disturbances.
o. Having a safety net for the lighting can suppress signal shingga
RF and extend the life of the lamp ( zero cross switch) .
p. Using a safety system to isolate the power supply voltage
against over-voltage grid.
q. Work on the grid voltage of 90-125 V or 170-240 V at
frequency of 50 Hz.
r. Incandescent lamps can be loaded Min. 600 VA each Signal Group.
s. Can be coordinated with similar controls.
t. Include Upgrade Module to ATCS
u. Control Module Include SMS system.
For more futher information

Call/ text:
Kresno Aji
Phone: + 6224-70598828
Cell Phone: + 62856 2804 777

Recommend to your friends