Radio Rig Icom IC-7000 HF/VHF/UHF All Mode Transceiver

Specifications
General
Frequency Coverage*1
Receive

Transmit
0.030–199.999MHz*2
400.000–470.000MHz*2
1.800– 1.999MHz
3.500– 3.999MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035MHz*3
7.000– 7.300MHz
10.100–10.150MHz
14.000–14.350MHz
18.068–18.168MHz
21.000–21.450MHz
24.890–24.990MHz
28.000–29.700MHz
50.000–54.000MHz
144.000–148.000MHz
430.0 00–450.000MHz
*1 Showing USA Version. Varies according to version.
*2 Some frequency bands are not guaranteed.
*3 USB only.
Mode USB, LSB, CW, RTTY, AM, FM, WFM (Rx only)
No. of memory channels 503 (495 regular, 6 scan edges and 2 call)
Antenna connector

SO-239×2

(for HF/50 MHz and 144/43/440MHz bands; 50©)
Temperature Range

-10°C to +60°C;

+14°F to +140°F
Frequency stability Less than ±0.5 ppm (+0°C to +50°C; +32°F to +122°F)
Power supply requirement 13.8V DC ±15%
Power consumption
(approx.)
Tx
Rx Max. Power
Standby
Max. Audio 22.0A
1.3A
1.6A
Dimensions (W×H×D)
(projections not included) 167(W)×58(H)×180(D) mm;
69/1(6(W)×29/32(H)×73/32(D) in.
Weight (approx.) 2.3kg; 5.1lb
Receiver
Intermediate frequencies
SSB, CW, RTTY, AM, FM
WFM
124.487MHz, 455kHz, 16.15kHz
134.732MHz, 10.70MHz
Sensitivity (Pre-amp: ON)

0.5-1.8MHz 1.8-29.9MHz 50-54MHz 144/440MHz
SSB/CW — 0.15µV 0.12µV 0.11µV
AM 4.0µV 2.0µV 1.0µV 1.0µV
FM — 0.5µV
(28-29.7) 0.25µV 0.18µV
WFM — — 10.0µV (76-108MHz)
SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINAD
Squelch sensitivity
SSB
FM
(Pre-amp: ON, threshold)
Less than 5.6µV
Less than 0.3µV
Selectivity
SSB (BW: 2.4kHz, sharp)

CW (BW: 500Hz, sharp)

RTTY (BW: 350Hz)

AM (BW: 6kHz)

FM (BW: 15kHz) (representative value)
More than 2.4kHz/–6dB
Less than 3.9kHz/–60dB
More than 500Hz/–6dB
Less than 900Hz/–60dB
More than 360Hz/–6dB
Less than 650Hz/–60dB
More than 6.0kHz/–6dB
Less than 15kHz/–60dB
More than 12kHz/–6dB
Less than 20kHz/–60dB
Spurious and image
rejection ratio More than 70dB (HF bands)
More than 65dB (other bands)
(except 1/2 IF through on 50MHz, IF through on 144MHz)
AF output power
(at 13.8V DC)
More than 2.0W at 10% distortion with an 8© load
EXT SP connector 2-conductor 3.5 (d) mm (1/83) / 8©

All stated specifications are subject to change without notice or obligation.

READ ALL INSTRUCTIONS carefully and completely before using the transceiver.
Supplied Accessories

* Hand microphone, HM-151
* DC power cable
* Spare fuses
* ACC cable (13-pin)
* Electronic keyer plug
* RTTY key plug
* Microphone hanger