Products Catalog

Specification

Senao EOA-3630 Wireless Multi Function Access Point IEEE802.11b/ g Compliant
Product Description

The outdoor wireless device EOA3630 is a powerful, enhanced, enterprise scale product with 7 multi-functions. External N-type connector provides antenna extend. It features output power levels setting, Narrow bandwidth selection, Traffic Shaping and Real-time RSSI indicator.

EOA3630 comes with wall mount kit and supports PoE function for quick outdoor installation. To ensure wireless security, it provides full coverage of security encryption mechanisms support including WEP,
WPA/ WPA2 and IEEE 802.1x.

Beside upgradable N-type interface which make it a scalable solution for all possible project requirements. Stable and high reliability design let users don' t worry about the operation in harsh environment.

Package Content

1* EOA3630
1* PoE injector with Power Adapter
1* QIG
1* Wall Mounting kit
1* CD with User' s Manual
Features Benefits
High Speed Data Rate Up to 108Mbps Capable of handling heavy data payloads such as MPEG video
streaming
High Output Power up to 28 dBm Extended excellent Range and Coverage ( fewer APs)
IEEE 802.11b/ g Compliant Fully Interoperable with IEEE 802.11b/ IEEE802.11g compliant
devices
Watertight and Weatherproof Avoid water invaded and weather corroded for outdoor
environment
Wall mount and mast mounting kit support Building on Outdoor environment easily.
Detachable antenna support ( N-Type) Collocate with any antenna for user' s environment
7 Multi-Function Users can use different mode in various environment
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple
buildings
Channel Bandwidth Selection Using different bandwidth to reach varied distance
Support RSSI Indicator ( CB mode) Users can select the best signal to connect with AP easily
Power-over-Ethernet Flexible Access Point locations and cost savings
Universal Repeater The easiest way to expand your wireless network' s coverage
Support Multi-SSID function ( 4 SSID) in AP mode Allow clients to access different networks through a single
access point and assign different policies and functions for each
SSID by manager
WPA2/ WPA/ IEEE 802.1x support Powerful data security
MAC address filtering in AP mode( up to 50) Ensures secure network connection
PPPoE/ PPtP function support ( CR mode) Easy to access internet via ISP service authentication
SNMP Remote Configuration Management Help administrators to remotely configure or manage the Access
Point easily.
QoS ( WMM) support Enhance user performance and density

Hardware Specification Software Feature

* MCU: Atheros AR2316, 180MHz
* Memory: 32MB SDRAM
* Flash: 8MB
* Physical Interface: LAN: One 10/ 100 Fast Ethernet RJ-45, Reset Button, Antenna Switch
* LEDs Status:
1 x Power/ Status
1 x LAN ( 10/ 100Mbps)
1 x WLAN ( Wireless is up)
3 x Link Quality ( Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality
* Power Requirements
Active Ethernet ( Power over Ethernet)
24V/ 0.6A
* Regulation Certifications: FCC Part 15/ UL, ETSI 300/ 328/ CE

RF Specification

* Frequency Band: 2.412^ 2.484 GHz
* Media Access Protocol: Carrier sense multiple access with collision avoidance ( CSMA/ CA)
* Modulation Technology
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- DBPSK, DQPSK, CCK
* Operating Channels
11 for North America, 14 for Japan, 13 for Europe
* Receive Sensitivity ( Typical)
IEEE802.11g: 6Mbps@ -92dBm, 54Mbps@ -74dBm
IEEE802.11b: 1Mbps@ -97dBm, 11Mbps@ -89dBm
* Available transmit power ( Average power)
IEEE802.11g
27dBm@ 6~ 24Mbps
25dBm@ 36Mbps
23dBm@ 48Mbps
22dBm@ 54Mbps
Tol erance = ± 1 dBm
IEEE802.11b
28dBm@ 1 ~ 11Mbps
Tolerance = ± 1 dBm

* Antenna: 1 x External N-type Connector

Package Content

1* EOA3630
1* PoE injector with Power Adapter
1* QIG
1* Wall Mounting kit
1* CD with User' s Manual

Environment & Mechanical

* Temperature Range: -20° C~ 70° C ( Operating) , -30° C to 80° C ( Storage)
* Humidity ( non-condensing) : 5% ^ 95% typical
* Dimensions: 260mm( L) x 175mm( W) x 65mm( H)
* Weight: 680g

* Topology: Infrastructure
* Operation Mode
Access point/ Client Bridge/ Repeater/ WDS AP/ WDS CB/ Client Router/ AP Router
* LAN: DHCP Server/ DHCP Client
* WAN: PPPoE/ PPtP ( Client Router / AP Router mode)
* Router: NAT/ NAPT
* VPN: VPN pass-through ( PPTP, L2TP, IPSEC)
* Wireless
- Wireless Mode – 11b / 11g / Disable
- Channel Selection ( Setting varies by Country)
- Transmission Rate
11 b/ g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
SuperG: 108Mbps
- Distance Control ( Ack timeout)
- Signal Strength
- Channel Bandwidth Selection- 20/ 10/ 5MHz
- RSSI Indicator ( CB mode)
- Auto Channel Selection
- AP Detection
- MSSID up to 4
- BSSID
* Security
- WEP Encryption-64/ 128/ 152 bit
- WPA Personal ( WPA-PSK using TKIP or AES)
- WPA Enterprise ( WPA-EAP using TKIP)
- 802.1x Authenticator
- Hide SSID in beacons
- Multiple SSID with 802.1q VLAN tagging ( up to 4 SSIDs) ( AP mode)
- MAC Filter( AP mode)
- L2 isolation( AP mode)
- Wireless STA ( Client) connected list
* QoS: WMM

Management

* Configuration: Web-based configuration ( HTTP) / Telnet
* Firmware Upgrade: - Upgrade firmware via web-browser and Keep latest setting when f/ w update
* Administrator Setting: Administrator password change
* Reset Setting: Reboot / Reset to Factory Default
* System monitoring: Status, Statistics and Event Log
* SNMP: V1, V2c
* MIB: MIB I, MIB II ( RFC1213)
* Bandwidth Measurement: Traffic Shaping
* Backup & Restore: Settings through Web
* Diagnostic: Ping Function and Trace-route