Products Catalog

Specification

PC 520M, Sanwa Multimeter

True RMS Digital Multimeter with Temperature Measurement, Data Logging, and PC Link System

Basic Features
• 3-4 / 5 digits 5000 count
• 0.08% best accuracy
• AC True RMS
• Fast speed bar graph
• Capacitance measurement
; Not suitable for measuring condensers with large leak current
• K type temperature -50' C~ 1000' C
; Optional accessory K-AD is necessary.
; K type temp. sensor K-250PC is included.
• Frequency measurement ( AC sine wave only)
• Data hold / Range hold
• Auto power off ( 17min.) ( cancelable)
• Test lead resistance zero adjustment function
• Alarm for improper test lead insertion to current terminal
• Protective holster with wall hanger and lead holder
• Tilt stand
• Optical link RS232C / USB interface ( optional)
Data Logging Mode :
• 43, 000 data points in built-in memory
• Selection of measurement inerval
0.05s/ 1s/ 20s/ 40s/ 1min/ 2min/ 4min/ 8min ( DCV, ACV, DCA, ACA)
0.2s/ 1s/ 20s/ 40s/ 1min/ 2min/ 4min/ 8min ( ' C, ohm)
0.4s/ 1s/ 20s/ 40s/ 1min/ 2min/ 4min/ 8min ( Hz)
• Auto-standby mode during data logging to extend battery life
• Auto-stop of data logging when batteries are low to guarantee accuracy of every logged datum
• Export logged data to PC
Display :
Numeral display 5000, bar graph 52 segments
Sampling rate :
5 times / sec., 60 times / sec. for bar graph
AC frequency bandwidth :
40Hz-20kHz ( below 500V) , 40Hz ~ 1kHz ( ACA)
Battery life :
Approx. 150h ( alkaline battery) at DCV range

Safety
IEC61010-1 ( EN61010-1) 2001-02
CAT.III 600V Max. / CAT.II1000V Max.

Optional Accessories
Software : PC Link, PC Link Plus
Optical PC link cable : KB-RS2, KB-USB2
Clamp probe : CL124, CL140, CL-20D, CL-22AD, CL33DC
Temperature probe :
T-300PC ( PC Link software is necessary.) , K-8-250^ 800
K type adapter : K-AD
Test lead : TL-21M, TL-21, TLF-120
Carrying case : C-CD

Specifications
DCV : 50m/ 500m/ 5/ 50/ 500/ 1000V
ACV : 50m/ 500m/ 5/ 50/ 500/ 1000V
DCA : 500u/ 5000u/ 50m/ 500m/ 5/ 10A
ACA : 500u/ 5000u/ 50m/ 500m/ 5/ 10A
Resistance : 50/ 500/ 5k/ 50k/ 500k/ 5M/ 50MOhm
Capacitance : 50n/ 500n/ 5u/ 50u/ 500u/ 9999uF
Temperature : -50~ 1000C ( thermocouple K type)
Frequency : 10Hz~ 125kHz
Continuity : Buzzer sounds at between 20Ohm and 120Ohm. Open voltage : approx. 3V
Diode Test : Open voltage : approx. 3.5V

Bandwidth : 40Hz~ 20kHz ( below 500V) 40Hz~ 1kHz ( ACA)
Fuse : 12.5A/ 500V IR20kA dia.6.3x32mm, 0.63A/ 500V IR200kA dia.6.3x32mm
Battery : 6LF22 ( 9V) x1
Size / Weight : H179xW87xD55mm / approx. 460g ( including holster)
Standard accessories included : Test Lead ( TL-82) , Holster ( H-50) , Thermocouple K type ( K-250PC) , Clip adapter ( CL-13) , Instruction manual