Specification :

Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface

Specefications

Model RY-300 RY-300T
Applicable fibers SM ( ITU-T G.652) , MM ( ITU-T G.651) , DS ( ITU-T G.653) , NZDS ( ITU-T G.655)
Fiber cleaved length 8 ~ 16mm  Coating diameter 250µ m
Fiber diameter Cladding diameter 80 ~ 150µ m , Coating diameter 100 ~ 1000¼ m
Auto focusing Available
Fiber aligning method clad aligning Core aligning clad aligning manual aligning
Average splice loss 0.02dB  SM , 0.01dB ( MM) , 0.04dB ( DS) , 0.04dB( NZDS)
Splicing time Typical 9 sec with standard SM fiber
Heating time Typical 30 sec
Applicable sleeves 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
Battery capacity Typical 160 cycles  splice and heat
Monitor 5.7 inch TFT color monitor
Terminal USB 1.1 and VGA , software upgrade via USB interface
Operating condition 0 ~ 5000m above sea level, 0 ~ 95% RH and -10^ 50 , respectively, Max. wind velocity of 15m/ s
Splicing mode Auto
normal
Fiber cleaved angle threshold set 0.1 ~ 10.0 ° , 0.1° step
Power supply AC 100-240V with AC adapter; inner Li-battery( 8000mAH)