Welcome to Indotrade.co
Sign In | Sign Up
Language:
Priority Member Indotrade Priority
14th Year
PT SARANA TEKNIK INDUSTRI
http://indotrade.co/saranacorp/
MENYEDIAKAN BERBAGAI JENIS DAN TYPE POMPA

showing 19 of 79

Products Catalog

MS Series - Modular Multistage Pump[Jul. 19, 2011 0:48:19]
PriceCall /Fax 021-6530 5868, Telp: 021 6519582
Quantity Order: Add to Basket
Payment MethodTelegraphic Transfer (T/T), Cashier Order
Pack. & DeliveryBOX/Pallet
OriginUnited States
Specification
The SIHImulti pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199.

Benefits: SIHImulti
• Advanced modular design reduces the number of parts while maximizing interchangeability.

• Optimal selection of impeller diameter and diffuser size installed in a standardized casing ensures that the pump matches the required duty for each application.

• The first stage of each pump size is equipped with a low required NPSH suction impeller.

• Axial thrust is hydraulically balanced by a patented balanced drum system with self-adjusting throttle device.

• Generously sized angular contact ball bearings absorb residual thrust.

• The pump can be built with an axial, vertical, left or right suction and a vertical, left or right discharge in any combination.

• All pump sizes can be provided with one or more " dummy" stages, if required.

Features: SIHImulti
• The pump is driven from the discharge side and the rotor is supported on the side by grease-lubricated anti-friction bearings and on the suction side by self-adjusting sleeve bearing lubricated by the pumped liquid.

• The pump feet are mounted to the suction and discharge casings in such a manner that the suction casing ( for suction casings with radial branch) and discharge casing can be swung to suit the installation conditions.

• Casing components are sealed by O-rings and held together with tie rods.

• The balancing line is returned to the suction casing or to the upstream vessel.

• The mechanical shaft seal is located on the drive side only. Sealing can be ( cooled or uncooled) single acting mechanical seal, packed gland ( cooled or uncooled) or double-acting mechanical seal ( uncooled) .

Technical Data:
Flow rate max. 1100 GPM ( 250 m³ / h)
Head max. 2067 feet ( 630 m)
Speed max. 3600 rpm
Temperature 14 to 356 F ( -10 to + 180° C)
Pressure Rating max. 914 psi ( 63 bar)
Shaft seal mechanical seal
packed gland

Industries:

Power
Water & Wastewater Treatment Plants
Irrigation
Chemical & Process
Pharmaceutical
Food
And many More

Applications:

Boiler feed
Condensate systems
Pressure boosting
Irrigation
High pressure cleaning
Heating
Waterworks, and water supply
Reverse osmosis
Chemical and Process
And many more ...