Products Catalog

Specification

Locate embedded metal before your drill bit or saw blade does. MetalliScanner® MT 6 is the tool you need if you are sawing concrete slabs or walls that contain rebar, conduit, or plumbing. This powerful dedicated metal scanning tool can locate metal up to 6 inches ( 152 mm) deep in solid concrete.

MetalliScanner® MT 6 locates both ferrous and non-ferrous metal up to 6 inches deep in concrete and other non-metallic surfaces. It also differentiates between ferrous and non-ferrous metal targets and indicates the target depth in inches and centimeters.

MT 6 indicates when you are approaching a metal object with a large plus ( + ) sign on the display. When the plus becomes a minus ( -) , you have crossed over the target and are now moving away.

Use MetalliScanner® MT 6 to find or avoid rebar, cables, pipe, nails in reclaimed wood, nails/ tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.

MetalliScanner® MT 6 is the tool recommended in the suggested protocol for the My Safe Florida Home Program to assist in hurricane loss mitigation.

* Automatically differentiates between magnetic metal ( such as rebar) and non-magnetic metal ( such as copper pipe)
* Shows the depth of metal from the surface in both inches and centimeters
* Easy-to-read LCD screen identifies the location of metal objects to the nearest inch and depth to the nearest 1/ 2 inch ( 13 mm)
* Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble