Specification :

TO-0.1% composite cement grinding aids
Mixing amount of 0.1%
Applicable to a variety of open-circuit grinding closed-circuit grinding, general-purpose cement for each intensity level.
TO-0.02% composite cement grinding aids
Mixing amount of 0.02%
Applies a variety of open circuit grinding closed-circuit grinding a variety of general-purpose admixture strength grade cement
The T0-0.03% type of composite cement grinding aids
Mixing amount of 0.03%
Applicable to a variety of open circuit grinding closed-circuit grinding strength grade Ash Cement
How to use:
A liquid metering pump according to the size of the configuration of the mill output to determine the amount of grinding aid, according to the production to Taiwan
2 TO-style grinding aids according to the mixing amount slightly higher than the recommended 2-3 hours added to the mill, as a wash mill activation process.
( 3) After the activation process, into the mill to mention production stage, the product fineness, than the surface area within the range of normal control, grinding sound or grinding system parameters to adjust gradually increase the mill output
Grinding aids, in the same mill output to adjust the mill parameters resorted to grinding fineness decreased or increased specific surface area to achieve the purpose of improving strength; quality, yield the same case, by adjusting the into the grinding material ratio program of admixtures to increase
Note:
Use of aids, should check and adjust the auxiliary equipment capacity
Control into the grinding material moisture content of less than 1.5%
Material flow Run crude phenomenon, then adjust the parameters of the grinding system or adjust the amount of grinding aids mixing
( 4) use of the process, pay attention to grading and loading of the grinding media
Regular checks of the accuracy of the grinding aid dosage