Specification :

Molybdenum disilicide ( MoSi2) heating elementis a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, " U" , " W" and " U" -right angle shapes, etc.
MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature.

MoSi2 Heating Element' s installation:
The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the " U" -shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.

( our suggestion: please choose the specialize power connector provided by our company)
The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick.The Dia.6 element can' t be used of 170A for a long time. The Dia.9 element can' t be used of 300A for a long time.

Specifications:
The product includes series 1700 grade, 1800 grade. Packaging is available in U shape, W shape, Straight shape ( X shape) and bend shape ( L shape) . The dimension ranges from 3/ 6, 4/ 9, 5/ 10, 6/ 10, 6/ 12, 6/ 14, 7/ 14, 8/ 16, 9/ 18 to 12/ 24mm