Specification :

Comprising two carefully matched SIC rods united with a silicon carbide bridge, U type element provide for wiring both terminals form one side of the furnace. Ideal for drop-through designs, radiant tube systems or where one element will not span heating chamber.

Notes for using and installing the heater:
a) Heater should be protected againest damp during storing or installing to ensure the performance of the henter.
b) In order to be sure of well-distributed lod of each and groups heater shoud be divided before assembling. The tolerance of the resistance of each one can not exceed by 10% each other.
c) Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.
d) When operating the electric furnace at the beginning, the voltage should be increased slowly and can not be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
e) When heater is damaged and need to be changed , the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, akk heater should be changed.