Specification :

GasBadge® Pro Single Gas Monitor, Sulfur Dioxide ( SO2) - Industrial Scientific

Features & Applications:

This GasBadge Pro Sulfur Dioxide Single Gas Monitor is packed full of features and offers a lifetime of protection from hazardous gases. Equipped with " smart" sensor technology, the unit can instantly identify and monitor hazardous levels of Sulfur Dioxide and alert you via select low and high alarms with ultra-bright LED' s.

This monitor features a concussion-proof overmold and is further protected by a durable, rugged outer shell that is water resistant, and protected from RF. With its four-button navigation, this device is user friendly to easily setup, operate, and calibrate all of its unique functions.

Compliance: UL and cUL Class I, Div. 1, Groups A, B, C, D; T4 approved. UL Class I, Zone 0, AEx ia IIC T4 approved. CSA Class I, Div. 1, Groups A, B, C, D; T4 approved.

Features:

" Smart" technology
Identifies Sulfur Dioxide
Water resistant outer shell
Concussion-proof mold
Loud Audible Alarm
Ultra-bright LEDs
Minimum of 2, 600 hrs of run time
Logs last 15 alarms
Ability to be viewed on a PC or printed with an infrared printer

Spec Summary:
Case: Rugged, water-resistant polycarbonate shell with protective concussion-proof overmold. RFI resistant.
Weight: 3 oz. ( 85 grams)
Dimensions: 3.2 x 1.9 x 1.1 in. ( 81.3 x 48.3 x 27.9 mm)
Measuring Range: Gas Symbol Range Increments
Sulfur Dioxide SO2 0-150 ppm 0.1 ppm
Display:

Custom LCD with graphical icons for easy use

Segmented display for direct gas readings

Backlight for low light conditions

" Go/ no-go" display mode

Peak reading indication
Alarms:

User selectable low and high alarms

Ultra-bright LEDs, loud audible alarm ( 95 dB and vibrating alarm)
Battery/ Runtime:

User replaceable 3V, CR2 Lithium battery

2, 600 hour runtime ( minimum)
Event-Logger:

Continually on. Logs last 15 alarm events, stamping how long ago the event occurred, the duration of the event, and the peak reading seen during the event.

Event-logger can be viewed on PC or printed directly from the instrument to an infrared printer.
Temperature Range: -40º C to 60º C ( -40º F to 140º F) , typical
Humidity Range: 0-99% RH ( non-condensing) , typical
IP Rating: Third-party certified IP66/ 67 ( water resistant)
Approvals:

UL and cUL:
- Class I, Div 1, Groups A, B, C, D; T4
- Class I, Zone 0, AEx ia IIC T4

CSA:
- Class I, Div 1, Groups A, B, C, D; T4
- Ex ia IIC T4

ATEX:
-Intrinsic Safety: Safety: EEx ia I/ IIC T4
-Equipment group and Category: II 1G; I M2
-EMC: EN50270

Performance: O2 ( EN50104) ; CO, H2S, ( EN45544) ( pending)
Australia: Ex ia I/ IIC T4
IEC: Ex ia IIC T4
Russia: GOST-R Approval ( pending)
MSHA: Intrinsically safe for methane/ air mixtures only ( pending)