Products Catalog

Specification

~ Roots Blowers
Roots Blower ( Pressure Conveyance)

The Characteristic of the TRUN-DEAN Blower¡ G

1. Product improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences.

2. The air compartment and the side cover of our blower has a flange and groove rim, which can not only strengthen the blower' s operational functions but also prevent eccentric phenomenal resulting from the fastening of the stud, which may shorten the life of the blower.

3. To reduce man-made errors, enhance the precision of the leave wheel, and to promote the blower efficiently, our rotor uses the most advanced one time work process Four-Shaft method.

4. Unique Design with Quality Components¡ GAppropriate clearance between the rotors and the rotors with the casing ensure no direct operational contact, hence no lubrication is necessary. The synchronous gear drive system and the shaft bearings are the only parts which require lubrication. Separate lateral chambers are designed to house these moving parts with proper seals to prevent oil leakage to the main chamber.

5. Low Noise & Minimal Vibration¡ GNoise and vibration reduction are the main emphasis in developing the new series of roots blower. The TRUNDEAN Blower rotor concept was adopted based on its flow characteristics which is very stable and even compared to the 2 lobes type, also coupled with the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.

6. Computerized CNC machines are used to produce components and parts of high quality and precision, also saves the user both time and labor during maintenance and replacement.

* Structural Graphs
* Performance Table
* Curve Diagraph
* Noise Level
* Outside Dimensions
* Dimensions of the Accessories
* Units Conversion
* Pressure Conveyance

click on the photo to close this window
Roots Blower ( Pressure Conveyance)

Click here for details.
Specifications:

* Applications of the Pressure Conveyance
* Pressures Applied¡ G0 ~ 0.6 kgf/ cm² 1 ~ 200HP
* Special order with specific designs

Features:

* Lower noise¡ GPressure pluses are the major noise source in blowers. The Trundean roots blower design can efficiently reduce noise by approximately 5 dB.
* Lower energy consumption¡ GTrundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption.
* Longer bearing life¡ GLess vibration transmitted through the lobe results approximately 20% longer bearing life.

~ Roots Vacuum
Vacuum Pump ( Applications of Vacuum)

The Characteristic of the TRUN-DEAN Blower¡ G

1. Product improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences.

2. The air compartment and the side cover of our blower has a flange and groove rim, which can not only strengthen the blower' s operational functions but also prevent eccentric phenomenal resulting from the fastening of the stud, which may shorten the life of the blower.

3. To reduce man-made errors, enhance the precision of the leave wheel, and to promote the blower efficiently, our rotor uses the most advanced one time work process Four-Shaft method.

4. Unique Design with Quality Components¡ GAppropriate clearance between the rotors and the rotors with the casing ensure no direct operational contact, hence no lubrication is necessary. The synchronous gear drive system and the shaft bearings are the only parts which require lubrication. Separate lateral chambers are designed to house these moving parts with proper seals to prevent oil leakage to the main chamber.

5. Low Noise & Minimal Vibration¡ GNoise and vibration reduction are the main emphasis in developing the new series of roots blower. The TRUNDEAN Blower rotor concept was adopted based on its flow characteristics which is very stable and even compared to the 2 lobes type, also coupled with the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.

6. Computerized CNC machines are used to produce components and parts of high quality and precision, also saves the user both time and labor during maintenance and replacement.

* Structural Graphs
* Performance Table
* Curve Diagraph
* Outside Dimensions
* Dimensions of the Accessories
* Units Conversion
* Pressure Conveyance

click on the photo to close this window
Vacuum Pump

Click here for details.
Specifications:

* Applications of Vacuum
* Pressures Applied¡ G0 ~ ¡ V0.45 kgf/ cm² 2 ~ 150HP
* Special order with specific designs

Features:

* Lower noise¡ GPressure pluses are the major noise source in blowers. The Trundean roots blower design can efficiently reduce noise by approximately 5 dB.
* Lower energy consumption¡ GTrundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption.
* Longer bearing life¡ GLess vibration transmitted through the lobe results approximately 20% longer bearing life.

~ Submersible Roots Blowers
Submersible Roots Blower ( Pressure Conveyance)

The Characteristic of the TRUN-DEAN Blower¡ G

1. Submersible roots blower prevent second social effect of pullution, noiseless and extending machine life-span.

2. The air compartment and the side cover of our blower has a flange and groove rim, which can not only strengthen the blower' s operational functions but also prevent eccentric phenomenal resulting from the fastening of the stud, which may shorten the life of the blower.

3. To reduce man-made errors, enhance the precision of the leave wheel, and to promote the blower efficiently, our rotor uses the most advanced one time work process Four-Shaft method.

4. Unique Design with Quality Components¡ GAppropriate clearance between the rotors and the rotors with the casing ensure no direct operational contact, hence no lubrication is necessary. The synchronous gear drive system and the shaft bearings are the only parts which require lubrication. Separate lateral chambers are designed to house these moving parts with proper seals to prevent oil leakage to the main chamber.

5. Low Noise & Minimal Vibration¡ GNoise and vibration reduction are the main emphasis in developing the new series of roots blower. The TRUNDEAN Blower rotor concept was adopted based on its flow characteristics which is very stable and even compared to the 2 lobes type, also coupled with the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.

6. Computerized CNC machines are used to produce components and parts of high quality and precision, also saves the user both time and labor during maintenance and replacement.

* Structural Graphs
* Performance Table
* Curve Diagraph
* Outside Dimensions
* Dimensions of the Accessories
* Units Conversion
* Where To Use

click on the photo to close this window
Submersible Roots Blower

Click here for details.
Specifications:

* Applications of the Pressure Conveyance
* Pressures Applied¡ G0 ~ 0.6 kgf/ cm² 2 ~ 20HP
* Special order with specific designs

Features:

* Quietness¡ GBecause of its submergibility under water, so there will be not much noise from the machine when in use.
* No need of a silencer¡ GBecause of its under water, the created noise will be very low, so there will be no need to do silencer. Under-water can mean space-saving.
* Strong structure, Be relieved¡ GThe direct connect between the motor and the blower can avoid the inconvenience of traditionally-done belt adjustment.
* Lower energy consumption¡ GTrundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption.
* Longer bearing life¡ GLess vibration transmitted through the lobe results approximately 20% longer bearing life.

~ Vertical Roots Blowers
Vertical Roots Blower ( Pressure Conveyance)

The Characteristic of the TRUN-DEAN Blower¡ G

1. Using vertical motor install on the blower. Discharge and suction silencer install both sides of the blower.

2. To reduce man-made errors, enhance the precision of the leave wheel, and to promote the blower efficiently, our rotor uses the most advanced one time work process Four-Shaft method.

3. Unique Design with Quality Components¡ GAppropriate clearance between the rotors and the rotors with the casing ensure no direct operational contact, hence no lubrication is necessary. The synchronous gear drive system and the shaft bearings are the only parts which require lubrication. Separate lateral chambers are designed to house these moving parts with proper seals to prevent oil leakage to the main chamber.

4. Low Noise & Minimal Vibration¡ G
Noise and vibration reduction are the main emphasis in developing the new series of roots blower. The TRUNDEAN Blower rotor concept was adopted based on its flow characteristics which is very stable and even compared to the 2 lobes type, also coupled with the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.

5. Computerized CNC machines are used to produce components and parts of high quality and precision, also saves the user both time and labor during maintenance and replacement.

* Structural Graphs
* Performance Table
* Curve Diagraph
* Outside Dimensions
* Dimensions of the Accessories
* Units Conversion
* Pressure Conveyance

click on the photo to close this window
Vertical Roots Blower ( Pressure Conveyance)

Click here for details.
Specifications:

* Applications of the Pressure Conveyance
* Pressures Applied¡ G0 ~ 0.6 kgf/ cm² 2 ~ 30HP
* Special order with specific designs

Features:

* Lower energy consumption¡ GTRUNDEAN Vertical Blower are designed to control backflow pressure to rotor in order to reduce energy consumption.
* Lower noise¡ GPressure pluses are the major noise source in blowers.The TRUNDEAN Vertical Blower design can efficiently reduce noise by approximately 5 dB.
* Longer bearing life¡ GLess vibration transmitted through the lobe results approximately 20% longer bearing life.
* Reduces the amount of regular maintenance that needs to be performed¡ GThe TRUNDEAN Vertical Blower uses direct-drive, reducing wear and tear on the belt, reducing the amount of maintenance needed, and reducing the risk of oil leaks.
* The blower is compact, occupying only a small amount of space¡ GNot only is the TRUNDEAN Vertical Blower very compact, the direction of the air vent can be adjusted according to actual needs, and the unit is easy to install.
* Easy installation¡ GThe blower is simple to install, does not require much time to maintain, does not occupy much space, and provides a noise-free living environment without the need for additional noise prevention equipment.

~ Magnetic Drive Pump
Magnetic Drive Pump

1. Magnet-driven sealless pumps are easy to assembly and disassembly ; no need special tools to replace parts.

2. The TMD series pumps are made of anti-corrosion, thermoplastic GFR-PP or PVDF, can be applied to wide range of chemical fluids.

3. Thank to the free seal feature, the pump is best for the application not allowing the leakage.

Application Examples¡ G
-PCB manufacturing
-Chemical plants
-Filtration
-Etching
-Metal surface treatment
-Heat exchanger
-Seawater aqua-culture

* The parts and materials
* Specifications
* Performance Curves
* Dimensions

click on the photo to close this window
Magnetic Drive Pump

Click here for details.

Material Spec.Download Now !
Features:

* Superior combination of materials and a leak-free, seamless design.
* Excellent corrosion resistant materials such as carbon, ceramics etc¡ K
* Designed with an emohasis on improved durability.
* Excellent corrosion resistant.
* Featuring enhanced reliability and safety.
* The series can be arranged with NEMA or IEC standard motor.
* Easy maintenance disassembly and assembly

~ Ring Blowers
Ring Blowers ( Pressure Conveyance)

Operating Principle¡ GWhen leaf wheel operate, it will create some air flow, which will be enforced by the surrounding air, and eventually the total air body will be pressured and moved to the air outlet and then goes out.

High Reliabilit¡ GIn the high pressure field, the blower is unique in durability of use, even when circumstance sudden changes it can still run safely and smoothly. Because of its simplicity in design, it needs almost no maintenance. With fine-cooling outer bearing, the blower also has the following strong point¡ G
( 1) High pressure.
( 2) The bearing operates with low temperature.
( 3) The lubrication gives extra durability in use.
( 4) Easy maintenance.

Applications¡ G
-Grain elevators
-Textile fiber collections
-Paper industry
-Sewage treatments
-Cement manufacturing
-Diesel burning
-Pulp industry
-Glass manufacturing
-Ice manufacturing
-Tunnel ventilation
-Fishery industry

* Structural Graphs
* Specifications
* Performance Curve
* Outside Dimensions

click on the photo to close this window
Chemical Pump - Ring Blowers ( Pressure Conveyance)

Click here for details.
Specifications:

* Applications of the Pressure Conveyance
* Pressures Applied¡ G500 ~ 3500 mmH2O¡ A0.6 ~ 28 kgf/ cm² ¡ A0.18 ~ 15 Kw
* The maximent permissible temperature and the gas temperature at the inlet is 40 ¢ J

Features:

* Low noise and vibration¡ GDynamic balancing minimizes vibration.
* Dust-proofed shaft seal¡ GProtects bearings from contaminated air stream and possible foreign particle damage.
* High reliability¡ GDirectly connected motor shaft-impeller provides reliable, long term performance. No gears, belts, motor brushes or sliding blades to require periodic maintenance.
* Space-efficient design¡ GUnique design results in substantial airflows at moderate pressures in minimum space and weight.
* Versatility¡ GEasily throttled and changd from pressure to suction operation. May be mounted in a variety of fashiond.
* Stable airflow¡ GCentrifugal compressor design delivers smooth, stable airflow with no pulsations.
* High-pressure airflow¡ GProduces continuous high-pressure airflow. The Ring Blower is ideally suited to many industrial application.
* No grease, no pollution¡ GThe leafwheel, when in operation, , is isolated from other parts of the machine, no need lubrication, so this means no cause of pollution at all.
* Easy installation¡ GThe well-equipped blower can be easily installed at any place, any time, for air-compressing or air-vacuuming¡ Fcan be set vertically or horizontally.