Specification :

INTRODUCTION

ARMI – B.90 it is a design formula to treat Boiler to have lower pressure ( 17.5 kg/ cm2 – 250 psi)
FUNCTION

* To protect corrosion and rust and slag water onto boiler
* To eliminate water acid
* To resistance with clay and easy to process when deposal
* Chemical reaction to water into Boiler to contruct clay water

ADVANTAGE

* Multi function characteristic to treat Boiler water, easy to use and control and simple Test Kit
* To maintaint steam production capacity
* To expand Boiler economic period specific pipes

PROCEDURE

* Low pressure Boiler
* It is economizer with 200 psi

DIRECTION FOR USE

* Please pour ARMI – B.90 to tank or suction pump of Boiler.
* Your dosage 6 Liter per ton water Boiler. To control your dosage, use Test Kit ARMI – TB.90

HOW TO CONTROL YOUR DOSAGE

To control your dosage with alkaline test “ P� from Boiler approximately 100 to 300 ppm. If your test shown less 10ppm, you shall be added our ARMI – B.90. Additional 6 Liter per ton water Boiler, shown alkaline test is approximately 170 ppm.

After finished, please you wait for one hour before re-test.

If your test allow more 100-300 ppm, as your high dosage as well as water alkaline to fill that also is high, your boiler pressured to 100-300 ppm allow, then added water is better

Salinity Control or Boiler Water Chloride Grade / Draw Off Boiler Water

Salty control or chloride grade to boiler to test with Test Kit of Chloride from ARMI – B 90.
The result of chloride test will directly be blowdown to water or not boiler. Chloride is not change if chemical reaction into boiler to mineral grade into boiler.
The result of chloride test shown at 200 ppm as normal chloride or salty.
If chloride test shown more 200 ppm that blow down and it should be filled with clean water.
CAUTION

Keep a dry, and keep away friom flammable point, if pour, wash with water immediately, keep away directly contact from your skin and eyes, if any wash with clean water immediately