Model : 3283 CLAMP ON LEAK HiTESTER
Clamp Meters ( Leak Current Meters -for AC only)
Easily monitor leak current fluctuations

Can measure a leak current certainly by high-sensitivity of 10 ¼ A resolution ( at 10.00 mA range)
Indication of 50/ 60 Hz leak current components by the filtering function
Can be used for monitoring the leak current condition in combination with a MEMORY HiCORDER( monitor output)

Basic specifications ( Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10, 000 times)

AC Current :
10.00m/ 100.0m/ 1.000/ 10.00/ 200.0 A, 5 ranges, ( 40Hz to 2kHz, True RMS) , Basic accuracy: ± 1.0 % rdg. ± 5 dgt.
AC Voltage :
None
Frequency measurement :
30.0 Hz to 1000 Hz, 2 ranges, Basic accuracy: ± 0.3 % rdg. ± 1 dgt.
Crest factor :
2.5 and under ( 1.5 at 200 A range)
Filter function :
Cut off frequency at filter ON: 180 Hz ( -3dB)
Signal Output :
REC output for current: DC 1 V/ f.s. ( 2 V/ f.s. at only 200 A range) , response time: less than 200 ms.
MON output for current: AC 1 V/ f.s. ( 2 V/ f.s. at only 200 A range) , 5 Hz to 15 kHz frequency band width ( -3 dB)
Other function :
Max./ Min./ Average value record, Data hold, Auto-power OFF
Display :
LCD, max. 2000 dgt., Display refresh rate: 4 times/ s at fast, 1 time/ 3 sec. at slow, and Bar graph display 4 times/ s
Power supply :
6F22 ( Stacked manganese battery) × 1, Continuous use: 40 hours, or AC adapter 9445-02
Core jaw dia. :
Æ 40 mm ( 1.57 in)
Dimensions, mass :
62 mm ( 2.44 in) W × 225 mm ( 8.86 in) H × 39 mm ( 1.54 in) D, 400 g ( 14.1 oz)
Supplied accessories :
CARRYING CASE 9399 × 1, Hand strap × 1, Stacked manganese battery ( 6F22) × 1, Instruction Manual × 1