Specification :

RANGE
0~ 9999mm ( at steel velocity) ; range selectable in fixed steps or continuously variable.
PULSER
Spike excitation with low, middle and high choices of the pulse energy.
Pulse Repetition Rate: manually adjustable from 10 to 1000 Hz.
Pulse width: Adjustable in a certain range to match different probes.
Damping: 100© , 200© , 400© selectable to meet different resolution and sensitivity need.
Probe work mode: Single element, dual element and through transmission;

RECEIVER

Real-time sampling at 160MHz high speed enough to record the defect information.
Rectification: Positive half wave, negative halfwave, full wave, and RF
DB Step: 0dB, 0.1 dB, 2dB, 6dB step value as well as auto-gain mode
ALARM
Alarm with sound and light, .

MERMORY
Total 100 configuration channels store all instrument operating parameters plus DAC/ AVG curve; stored configuration data can be easily previewed and recalled for quick, repeatable instrument setup. Total 1000 datasets store all instrument operating parameters plus A-scan. All the configuration channels and datasets can be transferred to PC via USB port.

FUNCTIONS
Peak Hold:
Automatically searching the peak wave inside the gate and hold it on the display.
Equivalent diameter calculation: find out the peak echo and calculate its equivalent diameter.
Continuous Record: Record the display continuously and save it to the memory inside the instrument.
Defect Localization: Localize the defect position, including the distance, the depth and its plane projection distance.
Defect Sizing: calculate the defect size
Defect Evaluation: Evaluate the defect by echo envelope.
DAC: Distance Amplitude Correction

AVG: Distance Gain Size curve function
Crack measure: Measure and calculate the crack depth
B-SCAN: Display the cross-section of the test block.

REAL-TIME CLOCK
Real time clock for tracking the time.
COMMUNICATION
USB2.0 high-speed communication port

SPECIFICATIONS
Range: ( 0 ~ 9999) mm
Bandwidth: ( 0.5 ~ 15) MHz
Material Velocity: ( 1000 ~ 9999) m / s
Dynamic Range: e 32dB
Vertical linear error: d 3%
Horizontal linear error: d 0.2%
Resolution: > 40dB ( 5P14)
Sensitivity Leavings: 60dB ( flat-bottomed deep hole 200mm$ 2)
Rejection: ( 0 to 80) % Linear
Noise level: d 10%
Power supply: DC 9V; lithium batteries work for 4 to 8 hours or more

Ambient temperature: ( -20 ~ 50) 
Relative Humidity: ( 20 ~ 95) % RH
Overall dimensions: 263 × 170 × 61 ( mm)

MFD510 Standard Configuration :

Main Body 1
Straight Beam Probe 1
Angle Probe 1
Machine-probe Cable ( Q9-Q9) 1
Battery Module 1
Power Adapter ( Charger) 1
Support Pillar 1
Manual 1
Instrument Case 1
Datapro Software 1
USB communication Cable 1