Products Catalog

Specification

The VEEMUX® Audio/Video Matrix Switch routes audio and video from many computers to multiple displays (projectors, monitors, etc.) and speakers. This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices. A single computer video output can be routed to one or more monitors. Each video output is buffered from each input, ensuring signal integrity throughout the system. When switching ports, the audio automatically mutes until the video has been synchronized. The audio can be muted on command.

* Control and configure the switch through Ethernet, serial port or front panel buttons.
* NTI Switch Control Program with Graphical User Interface (GUI control) is included.
* Inputs and outputs can be named.
* Switch VGA video directly.
* Each output provides one video signal and one stereo signal.
* Video bandwidth is 200 MHz or greater, fully loaded.
* Each input can be independently connected to any or all outputs.
* Features break-away audio – audio can be switched independent of video.
* Supports 1920x1200 video resolution at a refresh rate of 85 Hz.
* Crestron® compatible.
o Module controls routing, reset and status RS232 functions.

The VEEMUX switch is the ideal solution for any application where information from many computers is being presented, such as:

* Digital signage.
* Classrooms.
* Boardrooms.
* Trade shows.
* Conference and entertainment facilities.
* Courtrooms.
* Command centers.
* Control rooms.

Video Input
* Eight Female 15-pin HD connectors.
* Impedance: 75 Ohms.

Video Output
* Four Female 15-pin HD connectors.
* 1920x1200 video resolution with no degradation.
* Impedance: 75 Ohms.
* Bandwidth: 200 Mhz, fully loaded.

Audio Input
* Eight 3.5mm stereo audio jacks.
* Impedance: 10k Ohm.
* Maximum Input Level: 1 Vrms or 2.5Vp-p.

Audio Output
* Four 3.5mm stereo audio jacks.
* Drives 8-Ohm speakers.
* Unbalanced Gain: user defined.
* Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
* Total Harmonic Distortion + Noise: 0.01% at 1kHz.
* Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
* 200 mW RMS of continuous power per output.
* When switching ports, audio mutes until video has been synchronized.

Regulatory Approvals
* CE, FCC, RoHS

Cables
* Interface cables between the computers and the switch are required for proper operation.
* Recommended NTI video cables:
o VGA interface cable (VEXT-xx-MM).
o VGA to BNC cable (VINT-5B-6).
* Recommended NTI audio cables:
o SA-xx-MM.
* Cables not included.

Power
* 110 or 220 VAC at 50 or 60 Hz via IEC connector.
* Power consumption: 15W
* Add -48V5V10A2, optional internal DC-DC converter, to install the
SM-8x4-AV-LCD in a Telecom environment.

MTBF
* 59,510 hrs.

Environmental
* Operating temperature: 32°F to 100°F (0°C to 38°C)
* Storage temperature: -20°F to 140°F (-30°C to 60°C)
* Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.