Products Catalog (106) - CV. TEGUH primatama

FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( ELECTRIC) ( 340-B)

( 340-B) FLASH AND FIRE POINT BY CLEVELAND Â ASTM D-92
OPEN CUP ( ELECTRIC) AASHTO T-48

Is use to determine the Flash and Fire point of petroleum....

FLASH AND FIRE POINT....

( 330-B) FLASH AND FIRE POINT BY CLEVELAND Â ASTM D-92
OPEN CUP ( MANUAL) AASHTO T-48

Is use to determine the Flash and Fire point of petroleum....

TRIAXIAL TEST

Price: Negosiable

TRIAXIAL TEST

The triaxial test set provides test load up to 300 kgf at any speed from 0.00 to 3.00 per minute. This feature provides the capability for use in application such....

CONSOLIDATION TEST....

For determination the rate and magnitude of consolidation of soil when it is Restrained laterally, loaded and drained axially

TYPE PARTS NAME DESCRIPTION QTY
Consolidation....

COMPACTION....

For determining coefficient of permeability of soil sample

TYPE DESCRIPTION DESCRIPTION QTY
601-S Compaction Permeameter 1/ 13.33 cu. ft. mold , 6" i.d, 1 set
inlet....

SHRINKAGE LIMIT TEST

Price: Negosiable

( 415-S) SHRINKAGE LIMIT TEST SET ASTM D-427
AASHTO T-92

For determining shrinkage limit of soil sample

TYPE PARTS NAME DESCRIPTION QTY
417-S Prong Plate, 3 mm hard....

COMPACTION TEST SET

Price: Negosiable

( 440-S) COMPACTION TEST SET ASTM D-698 / D-1557
AASHTO T-99 / T-280

for determining moisture density relationship

441-S Standard Proctor Mold Machine steel, plated, 4" ....

LABORATORY CBR TEST....

Price: Negosiable

( 450-S) LABORATORY CBR ASTM D-1883
AASHTO T-193

For determining the bearing ratio of Soil

451-S Mechanical Loading Machine Steel frame, hand operated, two speeds, 10....

DIRECT SHEAR TEST

For determining shearing resistance of soil sample

TYPE PARTS NAME DESCRIPTION QTY
491-S Frame Welded steel frame hand operated. 1 pc
Loading Hanger , galvanized....

UNCONFINED....

for determining stress strain relationship of cohesive soil without confining pressure

TYPE PARTS NAME DESCRIPTION QTY
707-S Unconfined Compression Machine Cast aluminium....

UNCONFINED....

Price: Negosiable

for determining stress strain relationship of cohesive soil without confining pressure

TYPE PARTS NAME DESCRIPTION QTY
701-S Unconfined Compression Machine Electric 220 V....

SAND CONE TEST SET

For determining the density of Compacted Soil in Place

TYPE PARTS NAME DESCRIPTION QTY
468-S Sand Cone Bottle Plastic, 4 ltr. cap. approx. 1 pc
466-S Sand Cone....

HYDROMETER ANALYSIS....

Price: Negosiable

( 420-S) HYDROMETER ANALYSIS TEST SET ASTM D-422
AASHTO T-88

For determining grain size distribution of fine soil sample

TYPE PARTS NAME DESCRIPTION QTY

421-S ....

DYNAMIC CONE....

Price: Negosiable

335-S DYNAMIC CONE PENETROMETER
For rapid determination of field CBR value ( Rapid quality Control)

TYPE PARTS NAME DESCRIPTION QTY
336-S Handle Machined Steel Painted ....

DUTCH CONE....

Price: Negosiable

( 250-S) DUTCH CONE PENETROMETER 5 TON CAPACITY ASTM D-3441

251-S Press In Apparatus 5 tons Cap. Steel construction, manually operated 1 set
307-S Sounding Rod ....

DUTCH CONE....

Price: Negosiable

For determining cone resistance and friction resistance of soil layers

TYPE PARTS NAME DESCRIPTION QTY
306-S Press-In Apparatus 2.5 tons cap. Steel construction, manually....

STANDARD PENETRATION....

Price: Negosiable

( 525-S) SPT ( STANDARD PENETRATION TEST) ASTM D-1586
AASHTO T-206
For driving a split barrel sampler to obtain a refresentative
Soil sampler and measure of the soil....

HAND BOR

Price: Negosiable

320-S HAND BOR

Drilling for soil sampling preparation

TYPE PARTS NAME DESCRIPTION QTY
321-S Drilling Rod Solid bar, 1 m length, 1 1/ 4" dia. 10 pcs
324-S Iwan Type....

SAYBOLT VISCOSIMETER....

Price: Negotiable

( 320-B) SAYBOLT VISCOSIMETER ASTM D-420
AASHTO T-78

For determining Saybolt Viscosity of Petroleum products
At specified temperature between 21.1 and 98.8O C

....

AUTOMATIC ASPHALT....

( 500-B) AUTOMATIC ASPHALT COMPACTOR Â ASTM D-1559

Is designed for preparing samples for Marshall Test Fully automatic and easy to operate

Consist Of :
Power....

MOISTURE CONTENT....

For determining moisture content of soil sample

TYPE DESCRIPTION DESCRIPTION QTY
145-G Cent O-Gram Balance 311 gr cap., 0.01 gr sens. 1 pc
153-G Drying Oven 53 ltr....

SPEEDY MOISTURE....

For determining the moisture content of soil by means of calcium carbide gas pressure meter

TYPE PARTS NAME DESCRIPTION QTY
476-S Gauge Range 0 â € “ 20 % sample Weight....

COMPACTION....

For determining coefficient of permeability of soil sample

TYPE PARTS NAME DESCRIPTION QTY
611-S Compaction Permeameter 1/ 30 cu. ft. mold, 4" i.d, 1 set
inlet-outlet....

SPECIFIC GRAVITY....

Price: Negosiable

435-S SPECIFIC GRAVITY ( VACUUM METHOD) ASTM D-854/ AASHTO T-100

For determining specific gravity of soil sample

TYPE PARTS NAME DESCRIPTION QTY
Vacuum Stand :
438-S....

SPECIFIC GRAVITY ( ....

Price: Negosiable

( 425-S) SPECIFIC GRAVITY ( HEATING METHOD) ASTM D-854
AASHTO T-100

For determining specific gravity of soil sample

120-G Hot Plate Electric, 220 Volt. 1 Pc
122-G ....

SPECIFIC GRAVITY & ....

Price: Negosiable

( 275-A) SPECIFIC GRAVITY & ABSORPTION OF ASTM C-127
COARSE AGGREGATE AASHTO T-85

For determining of specific gravity and water absorption of coarse aggregates

276-A ....

CALIBRATION ANVIL....

Price: Negosiable

CALIBRATION ANVIL 450-C

Is used for periodic calibration of concrete test hammer, Completed with hammer guide.

LIQUID LIMIT TEST ....

Price: Negosiable

( 395-S) LIQUID LIMIT TEST ASTM D-4318
AASHTO T-89

For determining liquid limit of soil sample

TYPE PARTS NAME DESCRIPTION QTY

396-S Liquid Limit Device Hand....

PROVING RING....

Price: Negosiable

( 355-S) PROVING RING PENETROMETER

For determining penetration resistance of soil layers

TYPE PARTS NAME DESCRIPTION QTY
357-S Penetration Rod Round bar, 51.5 CM/ 49....

FIELD CBR TEST 380-S

Price: Negosiable

( 380-S) FIELD CBR TEST SET ASTM D-4429

For determining CBR Value on place
TYPE PARTS NAME DESCRIPTION QTY
381-S Mechanical Jack Consist of : 1 pc

Cast....

CDI-200 DIGITAL....

CDI-200 DIGITAL INDICATOR CONCRETE COMPRESSION MACHINE ASTM C-39

Is designed to test CUBE and CYLINDERS Concrete , Motorized and Digital Indicator
Avaliable in 2000 kN and....

ELECTRIC CONCRETE....

ELECTRIC CONCRETE COMPRESSION MACHINE astm C39 200-CM
For determining Compressive strength of concrete cube 15 x 15 x 15 cm
Or concrete Cylinder 15 cm dia x 30 cm height

....

CONCRETE COMPRESSION....

Price: Negosiable

150-CH CONCRETE COMPRESSION MACHINE ASTM C-39

For determining Compressive strength of concrete cube 15 x 15 x 15 cm
Or concrete Cylinder 15 cm dia x 30 cm height
1500 kN....

PLATE BEARING TEST....

365-S PLAT BEARING TEST
For determining ultimate bearing capacity of soil on place by means of field loading test

TYPE PARTS NAME DESCRIPTION QTY
Hydraulic Jack, hand....

SAMPLE EXTRUDER....

( 392-S) SAMPLE EXTRUDER HYDRAULIC â € “ ELECTRIC

For extruding soil specimen from 68 mm sampling tube welded steel electric 220 volt, 750 watt, 1 phase Supplied without sampling....

SAMPLE EXTRUDER 390....

Price: Negosiable

( 390-S) SAMPLE EXTRUDER MECHANIC

For extruding soil specimen from 68 mm sampling tube welded steel, Screw type
Supplied without sampling tube

MOT STRAIGHT EDGE ( ....

( 390-B) MOT STRAIGHT EDGE

For measuring the irregulation of road surface both asphalt and concrete pavement

TYPE Parts Name Description QTY
391-B Mot Straight ....

BENKELMAN BEAM ( 300....

( 300-B) BENKELMAN BEAM

For measuring the deflection of flexible pavement under the action of moving wheel loads.

TYPE Parts Name Description QTY
301-B ....

CORE DRILLING....

( 290-B) CORE DRILLING MACHINE

Is designed for cutting core sample from asphalt , concrete And
other material on the road, run ways and structures

TYPE Parts Name ....

MARSHALL COMPRESSION....

( 270-B) MARSHALL COMPRESSION MACHINE ASTM D-1559
AASHTO T-245

For measuring the resistance to Plastic Flow of Cylinder Speciment of Bituminous paving mixture
....

REFLUX EXTRACTOR....

( 225-B) REFLUX EXTRACTOR TEST Â ASTM D-2172
Â AASHTO T-164

For determining bitument content in hot mixed Paving mixture and pavement sample

TYPE Parts Name....

CENTRIFUGE EXTRACTOR....

( 210-B) CENTRIFUGE EXTRACTOR TEST ( ELECTRIC) Â ASTM D-2172
Â AASHTO T-164

For determining bitument content in hot mixed Paving mixture and pavement sample

....

CENTRIFUGE EXTRACTOR....

( 200-B) CENTRIFUGE EXTRACTOR TEST ( MANUAL) Â ASTM D-2172
Â AASHTO T-164

For determining bitument content in hot mixed Paving mixture and pavement sample

....

DUCTILITY OF....

( 260-B) DUCTILITY OF BITUMINOUS MATERIALS ASTM D-113
TEST AASHTO T-51

For determining Ductility of formed asphalt or semi solid bitumen.
By measuring....

LABORATORY....

( 250-BA) LABORATORY PENETRATION TEST ASTM D-5
( ELECTRIC) AASHTO T-49

Is Used for determining the consistency of bituminous materials

250-BA....

LABORATORY....

( 250-B) LABORATORY PENETRATION TEST ASTM D-5
( MANUAL) AASHTO T-49

Is Used for determining the consistency of bituminous materials

251-B....

LOSS ON HEATING THIN....

( 310-B) LOSS ON HEATING THIN-FILM TEST ASTM D-6/ D-1754
AAHSTO T-47/ T-179

For determining the loss in mass ( exclusive of water) of asphaltic compounds after....

SOFTENING POINT TEST....

( 350-B) SOFTENING POINT TEST Â ASTM D-36
AASHTO T-53

For determining softening point of asphalt and tar using the ring and ball method.

TYPE Parts Name ....