Specification :

The TS1102 compact full-range loudspeaker offers a specially engineered, purpose-designed 15-inch LF world class driver that enables it to match the powerful output of competitive 2-way designs.
The loudspeaker’ s high-frequency section comprises a 1-inch diaphragm compression driver coupled to a symmetrical ( 80 degrees horizontal by 60 degrees vertical) constant directivity horn. A high-power 15-inch magnet cone drivers , mounted in an optimally vented enclosure, reproduces low frequencies.
Frequency range ( -6dB) 80 Hz to 20 kHz
Sensitivity ( f> 80Hz) 95dB
SPL ( AES) 117dB SPL
Peak SPL 120dB SPL
Nominal directivity ( -6dB) Conical 60° waveguide
Nominal impedance 8 Ohm
Transducers 10" ( 250mm) bass driver
1" ( 25.4mm) compression driver
Rated Power( AES) 150W
Rated Power( PEAK) 300W
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors
Finish: BLACK
Protection grill Acoustically transparent perforated steel, 1.5mm thick
Connectors 4 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging: 6 standard points
Dimensions ( H x W x D) 480 x 322 x 362 mm
Weight Net unit weight 15kg
Gross weight, packed 18kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+ , cold pin 1-.