Specification :

The KV280 is also ideal for distributed sound reinforcement and can be used in medium power front-of-house (FOH) application for AV system, KTV, broadcasting, theatres, and night clubs.The great additional options for the KV280 provide this speaker a simple and easy installation: one can put in on the floor, install it on a stand or fly. Walls and ceiling are its range of installation thanks to its optional lyre brackets and multiple standard fixing points.For music requirement or distributed sound reinforcement, a dedicated setup for digital optional processor is provided in odder to optimize the speaker response.Combined with Trans-Audio subwoofers, the KV280 allows to creat compact and powerful systems suitable for all indoor or outdoor configuration.
Frequency range (-6dB) 65 Hz to 20 kHz
Sensitivity ( f>80Hz) 96dB
SPL (AES) 119dB SPL
Peak SPL 122dB SPL
Nominal directivity ( -6dB) Conical 60° waveguide
Nominal impedance 4 Ohm
Transducers 2 x 8 inch Bass Driver
1 x 1 inch compression driver
Rated Power(AES) 200W
Rated Power(PEAK) 400W
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors
Finish:BLACK
Protection grill Acoustically transparent perforated steel,1.5mm thick
Connectors 4 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging: 6 standard points
Dimensions (H x W x D) 260 x 545 x 316 mm
Weight Net unit weight 12kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+, cold pin 1-.