Specification :

The M10C coaxial series loudspeaker is fitted with a coaxial cone transducer. It features a coaxial point source in the transducer unit structure. This eliminates phase differences between high and low frequencies .And it provides no distortions due to distance and time differences among source points .Driven by the coaxial structure, the sound spreads in perfect sonic symmetry.
Frequency range ( -6dB) 70 Hz to 19 kHz
Sensitivity ( f> 80Hz) 95dB
SPL ( AES) 117dB SPL
Peak SPL 120dB SPL
Nominal directivity ( -6dB) Conical 90° waveguide
Nominal impedance 8 Ohm
Transducers 10" ( 250mm) bass driver
1" ( 25.4mm) compression driver
Rated Power( AES) 150W
Rated Power( PEAK) 300W
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors
Finish: BLACK
Protection grill Acoustically transparent perforated steel, 1.5mm thick
Connectors 4 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging: 6 standard points
Dimensions ( H x W x D) 480 x 315 x 344mm
Weight Net unit weight 14.6kg
Gross weight, packed 17.6kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+ , cold pin 1-.