Specification :

Detail: - - - -
FUNCTIONS |
CHARACTERISTIC |
PARAMETERS |

1. |

Map and check the curve of governor( idle , part and full load ) .
|
1. |
Quick view the characteristic curve of governor in dynamics. Test pump with the curve of governor. Save time, save effort, rapid, audio-visual, accurate.
It' s a very good tool for specialist to test pump.
|
Power |
5.5 / 7.5/ 11/ 15/ 18.5/ 22/ 30KW |

2. |
Checking of the advance device in dynamics. |
2. |
Computer ( industrial computer work station, hand book, pc) measure and control. Standard computer and standard ports. CD-ROM drive, hard disk, Windows operating system. |
Electronical supply |
3phase, 380V/ 50HZ ( or on request) |

3. |
Measurement of each cylinder' s delivery at any speed. |
3. |
High definition, LCD or CRT monitor. |
Interaxe height |
125mm |

4. |
Checking of each cylinder' s injection timing with static. |
4. |
Four ways to adjust speed. Hand, digital, programmed 8-steps preset, slide. |
Volume of fuel tank |
60L |

5. |
Measurement of rack travel at any speed. |
5. |
You can set up test data of injection pump, and use it to control test bench. |
DC. supply |
12/ 24V |

6. |
Checking of the LDA. |
6. |
You can set up database of governor' s curve. |
Feeding fuel pressure |
low0-0.4MPA
high0-4MPA
|

7. |
Checking of the mechanical governor. |
7. |
You can compare the test curve with the standard curve of governor. |
Range of speed |
+ / -0-4000RPM |

8. |
Checking of the pneumatic governor. |
8. |
You can get a report of a tested pump. |
Control fuel temperature |
40+ / -2 |

9. |
Checking of the vacuum capacity of governor. |
9. |
Patent technology. |
Cylinders |
12cyl. |

10. |
Measurement of the internal pressure of distributor pump body. |
10. |
Two control system. Computer and instruments. You can select one of them. |
Output air |
-0.05-0.3MPA |

11. |
Measurement of the reflu |
- - - -
Model Number:
Brand Name:
Payment Terms:
Minimum:
Certification:
Delivery Time:
Supply Ablity: