Specification :

Detail: Features:

1. The bench accords with the standard of " IEC 60736: 1982 testing equipment for electrical energy meters, IEC 62053.

2. The bench can be used to test single phase energy meter. ( up to 0.5 class)

3. The bench can do warm up test, starting test, no load test ( creep test) , error test ( accuracy test) , dial test, tests of the influence quantities and test of repeatability of the measurements.

4. The bench is using the PWM, technology to amplify voltage/ current output, the high efficiency at > 85% , and lower the heat. The PWM can check the malfunction checking, preset, alarm, and protection.

5. The signal source is using the newest digital controlled sine wave technology for frequency, amplitude and phase adjust.

6. The bench is using comparison technology to test the error of energy meters.

7. The bench is using the error processor system to calculate the error of each energy meter by the sub-error system, which can be connected by the internal RS485.

8. Different constant energy meter can be tested at one time.

9. Voltage is isolated by MSVT ( multi secondary voltage transformer) output, which suits for the voltage/ current close-link test of signal phase energy meter.

10. The bench can choose to operate by keyboard, which is very convenient. The working status of bench can be seen very clear and easy operation.

Specification:

Insulation secondary to secondary: 500V, 50Hz, and 60 seconds

Primary to secondary ratio accuracy: + 0.1% ( typical)

Secondary to secondary ratio accuracy less than: + 0.02%

Secondary to secondary phase angle accuracy less than + -1 minute

Number of secondary output: 8channel

Voltage amplifier:

Output voltage range: 50-288V;

Output maximum power: 200VA;

Resolution: 0.01% ;

Stability: Better than 0.05% / 3 min ( time base 5S) ;

Distortion factor: Frequency range: 45Hz~ 65Hz;

Power efficiency: More than 85% ;

Ambient temperature: 10~ 50C

Electronic overload and short-circuit protection.

Current amplifier:

Output current: Range: 1mA~ 120A ( option for 1mA~ 200A) ;

Output maximum power: 300VA;

Resolution: 0.01% ;

Stability: Better than 0.05% / 3 min ( time base 5S) ;

Distortion factor: Frequency range: 45Hz~ 65Hz;

Power efficiency: Greater than 85% ;

Ambient temperature: 10~ 50C

Electronic overload protection and security for open current circuit.

Phase Angle: 0~ 360 degree, resolution of phase angle setting: 0.1;

Output frequency range: 45Hz~ 65Hz; Resolution: 0.01Hz

Output stability of power: Numbers of calibrated energy meter: 5

Input power: 220/ 240V 15% , 50/ 60Hz;

Power consumption: Max. 1000VA.

Dimension: Long 1600mm* wide 800mm* high 1000mm
Model Number:
Brand Name:
Payment Terms:
Minimum:
Certification:
Delivery Time:
Supply Ablity: