STAINLESS STEEL SAFETY GLOVE 5 FINGER[Jan. 16, 2012 22:37:30]
Specification
Stainless Steel Ring Data
SS Material ; 316
Wire Diameter .0197 inches
Ring Outside Diameter .157 inches
Ring Inside Diameter .118 inches
TESTING INFORMATION
PRODUCT INFORMATION
� Five finger mesh glove, side cuff slit for easy donning and doffing of glove
� Individually welded stainless steel rings
� Gloves are 4-ring joined at the seams to prevent gaps an knife sticks
� Thumbs are attached with 3 ring join, for the strongest seam at a high wear area
� Ergonomic design is comfortable to wear and diminishes sagging mesh
� Gloves are ambidextrous following the 3 Step Reversible Design
SPERIAN WHITING + DAVIS - GLOVES
PRODUCT FEATURES
Whiting + Davis products are not CE certified, but are manufactured following the European
Standard of EN1082; section 6.4.1 states:
� Smoothly and progressively apply a force that pulls the rings apart as it rises from 0 N to 100
N ( 22½ pounds of force) over a period of 2 to 10 seconds. Report all instances of rings or plates
opening or breaking at a force of below 100 N.�
* N( Newton) = .225 pounds of force
Whiting+ Davis products, and Whiting + Davis products manufactured by Chainex have always
exceeded the European Standard.
Metal mesh gloves and garments should be cleaned and sanitized at least once daily, particularly in food processing and food handling
operations to comply with regulations governing these industries. Use a mild detergent in clean, warm water and vigorously scrub gloves
to remove foreign matter. The gloves can also be laundered by machine washing, again using a mild detergent. Water temperature of
122° F ( 50° C) is recommended whether gloves are manually or machine washed. Gloves must be rinsed in clean, hot water, at least
180° F ( 82° C) . Only disinfectants approved by food hygiene authorities should be used. Store in a cool, dry and well ventilated area.
The practice of hitting gloves against work stations or hard surfaces of any kind to remove debris is specifically discouraged, as such repetitive
action could damage the mesh.
WARNINGS
* Gloves are cut-resistant, not cut proof. Extreme caution should be used around moving machinery.
* * Laundering gloves that have been in contact with toxic or corrosive chemicals may result in a chemical reaction, including fumes that
could cause personal injury, serious illness or death.