Model 905P Process O2 Analyzer

MODEL 905P APPLICATIONS

The Model 905P is designed for continuous or spot check monitoring of O2 levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. The Model 905P is available with any single range from 0 to 5% up to 0 to 100% O2 vol/ vol full scale. Options include battery operation, analog outputs and sensor remotely mounted from the base unit. For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can operate in a continuous or batch ( 1-10 seconds) mode.

FEATURES

* Range: 0 to 5, 21, or 100%
oxygen
* Continuous O2 measurement
in all types of applications
* Portable; battery operation ( optional)
* Sample pump ( optional)
* Low cost
* 0-5 Vdc analog outputs

APPLICATIONS

* Gas Blending
* Biotech
* Fermentation
* Fruit Storage areas
* Welding gases
* Controlled Atmosphere
rooms

O2 SENSOR

The Model 905P design incorporates a long-life, heavy duty, proprietary electrochemical, maintenance free sensor. The sensor is totally sealed, operates at room temperature and is internally compensated for slight temperature variations. Unlike other sensors, it is not dependent on a controlled flow rate for accuracy, is not heated and is not affected by high levels of CO2 , hydrocarbon or other gases.

The sensor assembly is cable connected to the control circuit board. It can be used with diffusion or pumped sample draw systems. The measurement accuracy is not affected by sample flow rate.

BATTERY OPERATION

With its low power requirement, the Model 905P can be operated with an optional battery for those applications where AC power is not readily available. A totally sealed, long-life internal 12 Vdc gel battery accepts a full or partial charging cycle and will operate the unit for up to 8 hours.